Riding a bike is one of the healthiest and most exciting recreational activities, either to tour the city or to practice a specific discipline. And this is one of the reasons why some people use them constantly and are always looking for advice to take care of their bike.

This constant use naturally causes the good condition of the bicycles to be affected; their optimal conditions are being reduced, in addition, it is always necessary to bear in mind that bicycles are exposed to the conditions of where they are being driven, so that both the terrain and the time can affect their operation.

Ideally, bicycles should always have the same performance as they did on the first day of use, with all parts well-adjusted and in perfect condition. But continuous use makes the bike show the history it has traveled, and riders prefer their bikes to be in the best possible condition.

In this post we recommend 7 tips to take care of your bicycle in a simple, fast way and that can be done without causing any discomfort or requiring knowledge of experts in the area.

Tips for taking care of your bike: 7 practical tips

It is true that in a bicycle repair shop in Maitland are bikes checked and can send them to do the necessary maintenance so they are in perfect condition, but from home, each person can follow a few tips for caring bicycle independently. The tips to take care of your bicycle are the following:

1. Store in indicated places

Of all the tips, the storage place of the bikes is one of the fundamental aspects to keep them in good condition, since this is where they will spend most of the time, the conditions of these places must be adequate so as not to affect the bicycles.

The bicycle storage place should not be humid, as the humidity and the poured water could end up causing corrosion and oxidation, especially in the metallic parts such as the frame or the frame of the bike. In addition to this, the storage place should be free of dust, it is recommended to cover the bike to avoid contact with dust particles.


2. Protect the bike in the weather

Following the previous point, it is important to give a protective layer to bicycles in situations where they are left in the open, either momentarily or in their parked place. The factors of climate, such as humidity and rainwater, as well as the conditions of the place, such as land, can affect the performance of the bike, so cover is recommended with some plastic to protect them.

3. Cleaning the parts

In case moisture, dirt or dust has seeped into or stuck to the bike parts, the ideal would be to give them a cleaning to rid the bike of this residue. The cleaning of the bikes could be done every time it is used, or it could also be done once a week; the important thing is that it is constant.

Of the 7 tips to take care of your bicycle, this is the most laborious, since the cleaning necessary for the frame is not the same as cleaning the chains; the former could combine a wet cleaning with water and some detergent, while the latter would require a dry cleaning to avoid corrosion and oxidation of its parts.

4. Chain and chain ring lubrication

The dry cleaning of the chains and the plates, as well as the changes, allow the lubrication of these parts is possible. Chains are the parts that are most affected when bicycles are used, because they are the ones that make the effort of movement and they are the ones that receive water from the land, as well as dirt residues and others.

In short, this is important for a comfortable ride, and this lubrication should be done with good lubricating oil, not lubricating grease. The big difference is that good quality oil does not deteriorate the transmission, while grease creates a sticky / viscous film that is abrasive to the transmission.

bicycle shop Maitland

5. Brake care

Due to the same issue of cleanliness and humidity, brake cables tend to harden, which means that the pressure applied to the handles has no effect on the brakes because they will be hardened.

This can be solved by doing a quick little test on the wheels to check that the wheels have freedom of movement and are not limited by the hardened brakes.

6. Tire inspection

The air level in the tires must always be at its optimum point, and the pressure of these must be sufficient to support the weight of the cyclist as well as to support possible changes in the terrain. It is very common for the air in the tires to escape, so checking them before using the bikes is recommended.

7. Ongoing maintenance

These tips to take care of your bike are part of the ongoing maintenance that can be performed from home, without the need to go to a workshop or consult a mechanic. To keep bicycles in perfect condition, each rider must take care of them constantly, applying these tips frequently.

However, yes, it is true that these tips, when done one after another, consume a significant amount of time. If this happens, the best thing to do would be to go to the bicycle workshops at least once a month to make sure that the bikes do not present any faults that affect their performance.

You may also like to read: Motorcycle: How to choose your first motorcycle?

Ian Tamondong